• Download the Manual

• Download the RDworks software

• NOTE: Does not include LightBurn (for fiber)Software.

• Replacement: Air Purifier, Inline Fans, Laser Tube, Power Supply, Water Chiller, Rotary Axis.

• Laser Source: MAX
• Galvanometer Source: Galvo-Tech
• Output Power: 50W
• Laser Wavelength: 1064 nm
• Laser Frequency: 50-100 kHz
• Engraving Area: 200 x 200 mm (7.9x7.9 in.)
• Max. Engraving Speed: 7000 mm/s (275.6 ips)
• Max. Engraving Depth: 0.1 mm (0.004 in.) on a single pass
• Positioning Accuracy: ±0.1 μm (±0.000004 in.)
• Est. Laser Service Life (MTTF): 100,000 hr.
• Operating Software: EzCad2 for Windows XP, 7, 8, or 10 (32/64 bit)
• Supported Image Formats: .ai, .bmp, .dx, .dxf, .gif, .jpg, .plt, .png, .tga, .tif
• Package Dimensions: 84.5 x 59.5 x 78 cm (33.3x23.4x30.7 in.)
• Package Weight: 65 kg (143.3 lb.)
• Certification: CE, FDA

• 50W SOLID-STATE LASER: This 50W fibre laser marking machine from OMTech will allow you to bring your ideas to life with greater speed and precision than ever before, etching precious and base metals with perfect clarity; ideal for applications with tight tolerances, the laser source is also incredibly durable with an average service life of over 100,000 hours.

• PRECISION OPTICS: This laser metal marking machine's high-speed galvanometric system gives you extreme stability for quick scanning, engraving, and turnaround; make your mark on gemstones, silicon, steel, aluminium, brass, and more as the compact Fθ field lens uses its air-spaced design and protective & anti-reflective coatings to provide throughput with less than 1% distortion.

• 200x200mm WORKBED: This fibre laser cutter provides an 20x20 cm (7.9x7.9 inch) bed with a built-in workspace grid and external laser locator for fast and exact calibration and focusing; an interlocked protective cover and one pair of protective eyewear come included to let you handle the open design safely and cleanly; and grid dots facilitate the positioning bars that can be used to hold your material in just the right spot every time as your laser works at speeds up to 7000 mm/s (275.6 ips).

• EASY OPERATION: This laser engraving tool comes bundled with EzCad2 software compatible with 32 and 64-bit editions of Windows 7, 8, and 10 and a wide range of image formats (see below); the included footpad trigger keeps batch work humming along, while the emergency button stands by so nothing goes awry; and when you need to engrave rings, bracelets, or other curved surfaces, your rotary axis attachment (not incl.) can be easily connected using the plug-and-play 4-pin connection port.

• SUPERIOR SUPPORT & SERVICE: From garage artists to backyard businesses to professional jewelers and workshops, the OMTech community continues to grow thanks to our passionate dedication to making quality engraving available to all; order your own fibre engraver today and enjoy fast EU-based shipping, a strong 2 year warranty, and our ever helpful customer service and tech support.

• 1 x Fibre Laser Engraver
• 1 x Protective Cover
• 2 x Positioning Bars
• 8 x Attaching Bolts
• 1 x Tape Measure
• 1 x USB Flash Drive (with Software)
• 1 x Protective Eyewear
• 1 x Foot Switch
• 1 x Power Cord
• 1 x Allen Key Set
• 1 x Tool Box
• 1 x Monitor Mount
• 1 x Ground Wire
• 1 x USB Cable
• 1 x Height Lock
• 1 x Instruction Manual

• Metals: When engraving metals, generally use high power, a low frequency, and low to medium speed settings. To avoid using your marker at greater than 80% power for extended periods, you can also get similar effects by reducing the power somewhat while also increasing the number of passes or decreasing the engraving speed. Be mindful that some metals will produce conducting, reflective, and/or toxic dust. Softer metals naturally produce more dust during engraving, while harder metals can require higher power settings that also produce more dust. In addition to the risk to the user's skin and eyes, there may be enough dust produced (especially for repetitive industrial applications) that a full ventilation system is required to address the problem. Similarly, operators and others in the work area may need to use breathing PPE such as masks and respirators.

• Aluminium: Bare aluminium requires a somewhat higher frequency than other metals and will never produce a strong black mark similar to those created by engraving steel. When darker marking is required, consider employing anodisation or producing a deep engraving that can be darkened by using black epoxy or other filler. Anodised aluminium requires a little more speed but a very low frequency.

• Powder Coated Metals: Metals with a powder coating usually require a very high frequency and, for best results, at least 3 passes to remove the coating and polish the bare lower layer

• Precious Metals: Gold and similarly soft metals should be engraved with less power but a moderate speed. Silver and other semidurable metals are best engraved at a slightly higher power and slightly slower speed, but still not at the same power and speed as steel or aluminum.

• Plastics: When engraving plastics, generally use low power and high speed settings. Marking and engraving with too much power or at too low a speed can concentrate too much energy at the point of contact, causing the plastic to melt. Among other problems, this may produce poor engraving quality, noxious fumes and even fires.

• Stone: When engraving various kinds of stone, generally use moderate power and speed at low frequency. As with ceramics and metals, be mindful of the dust created (especially for repetitive industrial applications) and take similar measures to ensure the safety of users and others in the work area.

• No need to worry! We offer a 1-year warranty on all fiber laser machines.