130W CO2 Laser Engraver Cutting Machine with 900x1400mm Working Area (with Auto Focus), (forklift service not included))

130W CO2 Laser Engraver Cutting Machine with 900x1400mm Working Area (with Auto Focus), (forklift service not included))

Ship to
Regular price £5,999.99 Sale price £5,759.99 Save £240
Tax included. Shipping calculated at checkout.

• Download the Manual

• Download the RDworks software

• NOTE: Does not include LightBurn Software

• Replacement: Air Purifier, Inline Fans, Laser TubePower SupplyWater ChillerRotary Axis.

Dear customer, the price shown on the checkout page is the final price including tax, enjoy your shopping!

• Recommended engraving speed: 100 - 600mm/s

• Cutting speed: 1 - 40mm/s (actual speed depends on material)

• 20mm Focal lens diameter

• 2" Focal length

• 25mm Mirror diameter

• Resolution up to 4500 dpi

• 18 cm (7”) Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted)

• 20.3 cm (8”) Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards)

• The integrated power supply features increased response speed, performance, and cutting power — it’s beaming with possibilities!

• Cut up to 3.4 cm thick plywood and acrylic/plexiglass

• Uses standard 220V/50Hz power connection

• The Ruida control board works seamlessly with RDWorks for Windows PC (included), CorelLaser (included) and LightBurn (not included).

• RDWorks (included), LightBurn (not included), CADLaser (not included), CorelDRAW (not included), and AutoCAD (not included)are compatible with Windows 7, 8,10 (64/32 bit), XP, 2000, and Vista.

• The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)

• Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 

• 4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4 Wheel Rotary or Jaw Chuck rotary device use

• 900 x 1400mm (35" x 55") engraving/cutting area

• 200 x 154 x 100cm (78.7" x 60.6" x 39.4") overall dimensions

• Tackle large-scale projects with ease

• An adjustable stabilizing base allows easy height adjustment.

• 1 x Laser Engraver Machine

• 1 x 130W Laser Tube

• 10 x Allen Keys

• 1 x Grounding Wire

• 1 x USB Cable

• 1 x Ethernet Cable

• 1 x Power Cord

• 1 x Acrylic Focus Tool

• 1 x Tube of Silicone Insulation

• 1 x Roll of Double-Sided Tape

• 2 x Exhaust Pipes

• 1 x Hose Clamp

• 1 x Water Pipe

• 2 x Access Keys

• 1 x USB Flash Drive (with Software)

• 1 x Rotary Axis (optional)

• 1 x Instruction Manual

• 130W CO2 laser tube with an estimated lifetime of up to 12,000 operation hours depending on power setting usage and water cooling performance

• PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:

• Low Power 10–40% = 11,000–12,000 Hours

• Moderate Power 40–70% = 9,000–10,000 Hours

• High Power 70–100% = 6,000–7,000 Hours


• SUPERIOR LASER POWER: This laser engraving and cutting machine comes with a YL 130W CO2 laser tube to cut through thicker materials and engrave your designs faster, deeper, and clearer.

• RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8.

• USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.

• LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine.

• LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. 

• MOTORIZED AUTOFOCUS WORKBED: The autofocus pen senses the correct focus distance from the laser head to the target material and signals the Z-axis motor to automatically raise or lower the workbed to the perfect focus height.

• VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.

• RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.

• ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 4.5 cm (1.75”) or be fully retracted, allowing more control over different focal distance setups.

• AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.

• FOUR-WAY PASS-THROUGH: There’s always extra room! Equipped with front, side, and rear pass-through doors to accommodate materials larger than the table size. Front-to-Back Doors: 149cm W x 4.75cm H, Side-to-Side Doors: 96.5cm W x 2cm H

• BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

• WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. 

• AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.

• EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness and easing the cleanup process.

• No need to worry! We offer a 1-year parts warranty on all machines.

• 6-month warranty on laser tubes and laser power supplies 80W and up. 


CW-5202 6L Dual Water Cooler
CW-5202 6L Dual Water Cooler for 2 CO2 Laser Cutter and Engraver Details
6L Industrial Dual Water Chiller for 50W-150W CO2 Laser Engraver Machines (Pre-sale order)
CW-5200 6L Water Cooler
6L Industrial Water Chiller Details
6L Industrial Water Chiller for 50W-150W CO2 Laser Engraver Machines (Pre-sale order)
CW-3000 9L Industrial Water Chiller Cooling System for 40W CO2 Desktop Laser Engraver Machines (Pre-sale order)
4-Wheel Rotary Axis for 50-100W CO2 Laser Engraver
4-Wheel Rotary Axis
4-Wheel Rotary Axis with 360 Degree Rotation for 50-100W CO2 Laser Engraver Cutting Machine
Rotary Cutter and Engraver Axis Attachment
Jaw Chuck Rotary Axis for Laser Cutter Dimensions
Rotary Axis Attachment with Jaw Chuck for CO2 Laser Engraver Cutting Machine
80mm Rotary Axis Attachment for Laser Engraver Cutting Machine
80mm Rotary Axis Attachment for Laser Engraver Cutting Machine
80mm Rotary Axis Attachment for Laser Engraver Cutting Machine for Irregular-Shaped Objects
4" Inline Duct Fan for 40W CO2 Laser Engraver Cutter with Continuously Variable Speed Controller
Sold Out
6" Inline Duct Fan for CO2 Laser Engraver Cutter with Continuously Variable Speed Controller
80W 3-Stage Filter Fume Extractor and Air Purifier
3 Layer Filter Fume Extractor and Air Purifier Specifications
80W 3-Stage Filter Fume Extractor and Air Purifier for Laser Engraver Cutting Machine