• Download the Manual
• Download the RDworks software
• NOTE: Does not include LightBurnSoftware
• Replacement:Laser Tube, Power Supply, Mirrors, Lens
• Input Power: 220V/50Hz
• Colour: Blue, Grey
• Dimensions: 102 x 65 x 63 cm (40.2x25.6x24.8 in.)
• Engraving Area: 30 x 50 cm (12x20 in.)
• Rated Power: 50W
• Est. Laser Service Life: 6000 hr.
• Max. Engraving Speed: 23.6 ips (60 mm/s)
• Max. Cutting Speed: 15.7 ips (40 mm/s)
• Max. Cutting Depth: 0.25 in. (6mm)
• Max. Resolution: 4500 dpi
• Operating Temperature: 41-104°F/5-40°C • Bundled Software: RDWorks
• Supported Software (not incl.): CorelLaser, LaserDRAW, Lightburn
• Supported Image Formats: .ai, .bmp, .dxf, .gif, .hpgl, .jpeg, .pdf, .plt, .png, .rd, .svg, .tiff, .tga
• Data Transmission: USB Cable, USB Stick, Ethernet
• Package Weight: 199 lb. (90 kg)
• Certification: CE, FDA
• The Ruida control board works seamlessly with RDWorks for Windows PC (included), Corellaser(included), and LightBurn (not included)
• RDWorks (included), CorelDRAW (not included), AutoCAD (not included) and LightBurn (not included) are compatible with Windows 7, 8, 10 (64/32 bit), XP, 2000, and Vista.
• The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)
• Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing.
• 4-Pin Port connection for rotary axis devices.
• The integrated power supply features increased response speed, performance, and cutting power - it’s beaming with possibilities!
• A secondary LCD display panel monitors the electric current and auto-judges fault, reducing potential damage to the laser tube and power supply.
• Uses standard 220V/50Hz power connection.
• 50W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance
• PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:
• Low Power 10–40% = 1,700–2,000 Hours
• Moderate Power 40–70% = 1,300–1,500 Hours
• High Power 70–100% = 800–1,000 Hours
AVERAGE PARAMETER SETTINGS: CLICK HERE
• RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8 and CorelLaser.
• USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.
• LINEAR RAIL GUIDING SYSTEM: Equipped with X and Y stepper motors for efficient power transmission between the guide rails with high precision and long service life.
• VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.
• RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.
• ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 4.5 cm or be fully retracted, allowing more control over different focal distance setups.
• AIR ASSIST: A pre-installed air compressor guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your work cleaner and engravings more precise.
• BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extends the service life of your machine.
• WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 16–21°C (60–70°F).
• WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if the water stops circulating through the laser tube.
• AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.
•1 x Laser Engraver Machine
•1 x Water Pump
•1 x Ethernet to Ethernet Cable
•1 x Grounding Wire
•1 x Venting Exhaust Duct (1.2-meter max. length)
•2 x Water Hoses
•1 x USB Type-A to Type-A Cable
•1 x USB Drive with Software
•1 x Stainless Steel Clamp
•10 x Hex Wrenches
•1 x Double-sided Tape
•1 x Power Cord
•1 x Accessory Bag
•2 x Keys
•1 x Silicone Sealant
•1 x Instruction Manual
• No need to worry! We offer a 1-year parts warranty on all machines.
• 6-month warranty on laser tube and laser power supplies 60W and below