• Download the Manual

• Download the RDworks software

• NOTE: Does not include LightBurn Software

• Replacement: Replacement Tube, Power Supply, Mirrors, and Lens. 

• 600 x 1000 mm (23.5” x 39.5”) engraving/cutting area

• 160 x 124 x 100 cm (63” x 49” x 39”) overall dimensions

• Tackle large projects with ease.

• An adjustable stabilising base allows easy height adjustment.

• Recommended engraving speed: 0 - 600mm/s

• Recommended cutting speed: 1 - 30mm/s (actual speed depends on material)

• 20mm Focal lens diameter

• 2" Focal length

• 25mm Mirror diameter

• Resolution up to 4500 dpi

• 17.75cm (7”) Standard Z-depth (Workspace height with honeycomb bed installed and laser head half retracted)

• 20.3cm (8”) Max Z-depth (Workspace height with honeycomb bed removed, knife bed in use, and laser head fully retracted upwards)

• The Ruida control board works seamlessly with RDWorks for Windows PC (included), CorelLaser (included), and LightBurn (not included)

• RDWorks (included), CorelDRAW (not included), AutoCAD (not included)and LightBurn (not included) are compatible with Windows 7, 8,10 (64/32 bit), XP, 2000, and Vista.

• The Ruida controller is compatible with macOS (Version 10.11 and higher) ONLY if you use LightBurn software (not included)

• Photo-ready to convert images from HPLG, BMP, GIF, JPG, JPEG, DXF, DST, AI formats, and more into .RD files for laser processing. 

• 4-Pin Port connection for rotary axis devices. *Honeycomb bed and the knife bed removal required for 4-Wheel Rotary or Jaw Chuck Rotary Device use.

• The integrated power supply features increased response speed, performance, and cutting power — it’s beaming with possibilities!

• Cut up to 2.5 cm thick plywood and acrylic/plexiglass

• Uses standard 230V/50Hz power connection

• Two 80W CO2 laser tubes with estimated lifetimes of up to 8,000 operation hours depending on power setting usage and water cooling performance

• PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows:

• Low Power 10–40% = 7,000–8,000 Hours

• Moderate Power 40–70% = 5,000–6,500 Hours

• High Power 70–100% = 3,000–4,000 Hours

Average Parameter Settings: Click Here

• Materialize your vision: Our CO2 lasers are capable of engraving materials such as wood, glass, leather, coated metals (anodized aluminium), acrylic, and more. 

• Bare metal marking requires a pre-treatment coating.

• DOUBLE THE EFFICIENCY: Equipped with two 80W laser tubes and two laser heads allowing you to engrave twice as fast. It’s perfect for professional applications where speed and work efficiency are top priorities.

• RUIDA DIGITAL CONTROLLER: The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8 and CorelLaser.

• USB & ETHERNET PORTS: 2 USB ports allow flash drive connectivity and a USB-to-USB PC connection. Plus, the ethernet connection is compatible with PCs.

• LCD DISPLAY: A secondary display panel monitors the real-time electric current in milliamps and auto-judges fault, easing the troubleshooting process and reducing potential damage to the laser tube and power supply. Plus, it’s accessibly located on the left side of the machine.

• LINEAR RAIL GUIDING SYSTEM: Equipped with X, Y, and Z stepper motors for efficient power transmission between the guide rails with high precision and long service life. 

• MOTORIZED Z-AXIS: An electric lift powers the workbed's ascent/descent function, allowing effortless platform height adjustment to accommodate bulky objects and help you focus the laser head.

• VIEWING WINDOW: A transparent acrylic glass viewing window allows observation throughout the laser engraving process. Plus, it’s equipped with a sepia tint to protect your eyes from indirect laser beam exposure.

• RED DOT GUIDANCE: A red dot pointer mounted on the laser head quickly indicates engraving points, marks the machine’s path, and identifies positioning sizes, allowing an effortless project setup process.

• ADJUSTABLE LASER NOZZLE: The laser nozzle can extend downwards up to 4.5 cm or be fully retracted, allowing more control over different focal distance setups.

• AIR ASSIST: A pre-installed air compressor guides a pressurised air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping your workbed cleaner and engravings more precise.

• BUILT-IN VENTILATION: A pre-installed vent fan expels smoke and fumes to create a safer workspace and extend the service life of your machine.

• WATER COOLING SYSTEM: Pre-installed hoses along with the included water pump allow for a fast and easy setup. Only use with distilled water, ensuring it stays between 16–21°C (60–70°F).

• WATER FLOW SENSOR: A pressure flow sensor monitors water flow throughout the laser engraving process and prevents the laser from firing if water stops circulating through the laser tube. 

• AUTOMATIC SHUTDOWN: The auto-shutdown safety feature stops the machine when opening the transparent window cover. Once closed, press the “Enter” button to continue operation.

• EFFORTLESS CLEANUP: A debris collection system below the workbed funnels engraving debris into a removable collection tray, helping maintain your machine’s cleanliness and easing the cleanup process.

• 1 x Laser Engraver Machine

• 10 x Hex Wrenches

• 1 x Ground Wire

• 1 x USB Cable

• 1 x Ethernet Cable

• 1 x Power Cord

• 1 x Water Pump

• 1 x Double-Sided Tape

• 1 x Exhaust Pipe

• 2 x Water Hoses

• 1 x Hose Clamp

• 2 x Keys

• 1 x USB Flash Drive (with software)

• 1 x Debris Box

• 1 x Accessory Bag

• 1 x Instruction Manual

• No need to worry! We offer a 1-year parts warranty on all machines.

• 6-month warranty on laser tubes and laser power supplies 80W and up

This 80W CO2 laser engraver continues to uphold our previous high standards with its Ruida control panel, included RDWorks 8 & CorelLaser software suite, LCD display, large 60x100 cm working area, and pass-through doors that allow even larger pieces to be worked on. With OMT's precision engineering, quality materials & assembly, and good name, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop.